Ikonta 520 novar

This is a medium format camera (i.e. takes 120 film) from Zeiss Ikon.  It is a half-frame camera - 6 x 4.5 cm negative - which is half of a standard 120 frame of 6 x 9 cm.

Ikonta 520, front view

lens: Novar
focal length:  75mm
apertures: f6.3 to f32
focus range: 4'6" to infinity (that is the scale, actually about 4 feet)
lens fitting: fixed
shutter: Derval
speeds: 1/25, 1/50, 1/100, B, T
flash: n/a
film size: 120

The body is made from cast aluminium.  This body casting is shared between the Ikonta 520, Bob 510 and Nettar 515. It is quite hard to understand why Zeiss Ikon shared the body between three different camera lines instead of calling them all Ikonta (the oldest name) seeing as Bob, Ikonta and Nettar all come with a range of lenses and shutters and can be considered to be one range in effect if not in name.

So, this Ikonta.  The lens is a Novar which is a triplet and performs surprisingly well once stopped down to f8 or smaller.  Ikontas were also available with Tessars at a higher price and wider aperture Novars.  The Novar on this camera is quite a slow lens with a maximum aperture of f6.3.  The focussing is front cell only, rather than the whole lens moving (giving not quite so good image quality) and the focussing scale is in feet indicating that the camera is an official import into the UK.

The shutter is an everset Derval (everset means it does not need cocking before firing as a Klio or Compur would).  This is a fairly crude (and so cheap) shutter with two blades only and only offers three speeds: 1/25, 1/50 and 1/100.  With a slow lens like this camera has, faster shutter speeds would have been superfluous, particularly with the slow, by modern standards, films available in the 1930s.

Detail of rim-set shutter adjuster on Derval shutter

The shutter is a dial set shutter which means that the speed adjustment is by a dial set above the shutter housing.  More modern shutters have a rim set adjuster which is a ring around the shutter housing.  This shutter does not have a V (=Vorlaufwerk) setting for delayed action and as is usual with cameras made before the late 1940s, there is no flash connection or synchronisation.

As I mentioned, the maximum aperture is rather small at f6.3 but the minimum aperture is surprisingly small - f32 - so the range of exposures possible is still respectably large.

A standard photograph with this camera (as with the Bob 510 and Nettar 515) is in portrait format and in this orientation the shutter release is underneath the camera and is uncomfortable to use.  To take landscape pictures, the camera must be used on its side and the shutter release is on the side and easy to use.

Comet 44 hence the

Comet 44, front view

This is a later development of the Comet line.  I also have a Comet S which is a half-frame camera.  This Comet is a full-frame camera.  It is a well designed and well made cheap camera.  In that respect it compares well with the Japanese Meisupii and Halina ranges which are not that well made.

This is a 127 camera which takes square pictures 4 x 4 cm (hence the '44' in the name?).

The main body is made from cast aluminium alloy with an anodised finish.  Internally, there are some aluminium plates as well.  The back, which is also aluminium, comes away entirely to load the film.

The lens is marked as Bencini Acromatic 5.5 cm, f8.  The lens is actually a simple single meniscus lens.  In this camera, the lens is loose because someone has attempted to dismantle the camera.  Unfortunately, it is not possible to tighten the lens without a special tool which I do not have.

The shutter is a simple shutter with two speeds - 1/100 and 1/50 - and includes flash synchronisation.  The flash sync. mechanism is rather crude and is unlikely to work with electronic flash.

On the top plate on the left is the spool release to allow the insertion of a new roll of film - this is pulled up while putting the film in or taking the used spool out.  It is spring loaded to keep the film securely in place.

Comet 44, top view

Next to the spool release is an accessory shoe with a large chrome spring.  Next to this is the shutter release.  This is nicely placed for the index finger.  The last item on the top plate is a knurled chrome knob to advance the film.  this also pulls up to allow the insertion of an empty spool and removal of the finished film.

In the centre of the top is a bright yellow viewfinder.  that is, it looks yellow until you use it but looking through it, it is purple.  As is usual with roll film cameras, there is a red window on the back to allow you to see the frame numbers when you are winding the film on.