Showing posts with label Halina 35X review. Show all posts
Showing posts with label Halina 35X review. Show all posts

Ikonta 520 novar

Friday, June 28, 2013

This is a medium format camera (i.e. takes 120 film) from Zeiss Ikon.  It is a half-frame camera - 6 x 4.5 cm negative - which is half of a standard 120 frame of 6 x 9 cm.


Ikonta 520, front view
lens: Novar
focal length:  75mm
apertures: f6.3 to f32
focus range: 4'6" to infinity (that is the scale, actually about 4 feet)
lens fitting: fixed
shutter: Derval
speeds: 1/25, 1/50, 1/100, B, T
flash: n/a
film size: 120

The body is made from cast aluminium.  This body casting is shared between the Ikonta 520, Bob 510 and Nettar 515. It is quite hard to understand why Zeiss Ikon shared the body between three different camera lines instead of calling them all Ikonta (the oldest name) seeing as Bob, Ikonta and Nettar all come with a range of lenses and shutters and can be considered to be one range in effect if not in name.

So, this Ikonta.  The lens is a Novar which is a triplet and performs surprisingly well once stopped down to f8 or smaller.  Ikontas were also available with Tessars at a higher price and wider aperture Novars.  The Novar on this camera is quite a slow lens with a maximum aperture of f6.3.  The focussing is front cell only, rather than the whole lens moving (giving not quite so good image quality) and the focussing scale is in feet indicating that the camera is an official import into the UK.

The shutter is an everset Derval (everset means it does not need cocking before firing as a Klio or Compur would).  This is a fairly crude (and so cheap) shutter with two blades only and only offers three speeds: 1/25, 1/50 and 1/100.  With a slow lens like this camera has, faster shutter speeds would have been superfluous, particularly with the slow, by modern standards, films available in the 1930s.


Detail of rim-set shutter adjuster on Derval shutter
The shutter is a dial set shutter which means that the speed adjustment is by a dial set above the shutter housing.  More modern shutters have a rim set adjuster which is a ring around the shutter housing.  This shutter does not have a V (=Vorlaufwerk) setting for delayed action and as is usual with cameras made before the late 1940s, there is no flash connection or synchronisation.

As I mentioned, the maximum aperture is rather small at f6.3 but the minimum aperture is surprisingly small - f32 - so the range of exposures possible is still respectably large.

A standard photograph with this camera (as with the Bob 510 and Nettar 515) is in portrait format and in this orientation the shutter release is underneath the camera and is uncomfortable to use.  To take landscape pictures, the camera must be used on its side and the shutter release is on the side and easy to use.

Halina 35X review

Sunday, January 6, 2013

This is a small but heavy Japanese camera made by Haking.  It looks a little like a Leica which I am sure is not a complete coincidence.  It is entirely made from metal - which metal I am not sure but I would presume an aluminium alloy of some sort.  The top plate is pressed brass which shows the manufacturing standards - none of it is quite flat or quite straight but fits well none-the-less.  This camera is small (115 x 70 x 70 mm), frankly a bit small for my hands but not too small to be used.


Halina 35X - top view
lens: Halina Anastigmat
focal length: 45mm
apertures: 3.5 - 16 no click stops
focus range: 3 feet to infinity
lens fitting: fixed
shutter: simple
speeds: 1/25, 1/50, 1/100, 1/200
flash: PC socket, M synch
film size:  35mm

The lens is an Halina Anastigmat, f3.5 45mm.  When I received this camera, both the focussing helical and the aperture control were so stiff it was nearly impossible to turn them.  Research on the Interweb suggests that this was usual from new.  I have applied naptha (lighter fuel) in an attempt to remove any sticky gunk from both of these and after the naptha had dried off, I applied a small amount of clock oil which seems to have freed them both nicely.  The test will be if the controls are still free in a few days time.  The lens is a triplet with the outer two elements being coated but not the middle element.

The aperture is adjustable from f3.5 to f16 according to the scale, but the control ring moves well beyond f16 so i suspect the smallest aperture is at least f22.  The markings on the aperture control ring are very irregular.  This is for two reasons.  Firstly, the scale is logarithmic - most of my cameras have a linear aperture scale but a few have a logarithmic one - the difference depends on how the control ring is linked to the diaphragm blades.  Secondly, the aperture range starts at f3.5 and then goes to f4 - the change from f3.5 to f4 is only half a stop; a full stop to f4 would be from f2.8.

Focussing is from three feet to infinity.  I have yet to use this camera so I have no idea how well it will perform, but my Interweb research suggests not too well.  I will make up my own mind when I have run a test film through the camera.  There is a depth of field scale next to the focussing scale which is something I wish modern lenses had.  I find it very useful.

This camera has both double exposure control and missed frame control.  Winding on the film releases the shutter release but does not cock the shutter.  This is done by a lever on the left side of the shutter housing.  So, to take a picture, you need to wind on and manually cock the shutter.  Already by the time this camera was made (1959ish) this was a very old fashioned way of doing things.  however, this method does allow for multiple exposures if you want them - hold down the shutter release and cock and release the cocking lever for each exposure you want.

Both film advance and film rewind are managed by knobs rather than levers - again, rather old fashioned for the time.  I am quite happy with knobs rather than levers.

The viewfinder is a reverse Galilean finder - 'reverse' means that it produces a smaller than life image which in this case is only just smaller.  The viewfinder is small - much the same size as an early Voigtlander Vito B - and smaller than was usual for the time.  This makes it hard to use for spectacle wearers like myself.

There is an accessory shoe - a cold shoe in flash terms - and a PC flash connector.  There is a 'M' embossed in the metal beside the PC connector so this is synchronised for ordinary flash bulbs rather than fast bulbs or electronic flash. The frame counter is beneath the film advance and it counts down to zero so when loading a new film the counter needs to be set to the length of the film and the figure showing is how many frames are left.  For a thirty six exposure film, you initially set the frame counter to zero, there being thirty six divisions around the counter.

To load a film you need to remove the back and base of the camera in one piece.  There is a central knob in the base plate which needs to be turned a quarter of a turn to open the camera.  The end of the film slides beneath a spring on the take-up spool and there is no tooth to engage in a sprocket hole, the film being held in place entirely by the pressure of the spring.  I have just loaded my first film and this is very easy to do.  With cameras where the back and base come away together, I generally find loading new film quite difficult - certainly with both Zeiss Ikon Contaflex and Voigtlander Bessamatic cameras - supporting the weight of the camera while manipulating both the film and take-up spool can be quite difficult.  Not so with this camera partly, I suspect, because the camera is not so large or heavy as those cameras.